Skip to content
koducathome

Current Converter

Convert µA, mA, A and kA for circuit design, battery runtimes, fuses and power supplies.

How to use this tool

Steps for using the Unit Converter.

  1. Type a number into From — amperes are preselected. Commas and scientific notation such as 2.5e3 are accepted.
  2. Pick the units to convert between; the result in milliamperes (or whichever unit you choose) updates as you type. Use the swap button to reverse the conversion.
  3. Set the decimal places, turn on Show formula to see the calculation, and copy or share the result.
  4. Below the converter, the table lists every electric current unit with its exact definition, and the links open dedicated pages for the most common pairs.

Example

0.5 amperes to milliamperes

Value
0.5 A
Result
500 mA

Formula: mA = A × 1000

Common use cases

  • LED and microcontroller currents in mA.
  • Battery life estimates.
  • Fuse and cable ratings in A.

Current unit table

Current units with their symbols and definitions
UnitSymbolSystemDefinitionIn amperes
MicroampereµAMetric10⁻⁶ A0.000001
MilliamperemAMetric1/1000 A0.001
AmpereASISI base unit of electric current1
KiloamperekAMetric1,000 A1,000

Popular current conversions

Other unit converters

See all 27 unit converters

About electric current units

The ampere is the SI base unit of electric current — one coulomb of charge per second. Small electronic currents are measured in milliamps (1/1,000 A) and microamps (1/1,000,000 A).

Datasheets often mix units: a microcontroller might draw 15 mA running and 2 µA asleep, while its USB supply is rated 0.5 A.

Limitations

  • Results are rounded for display only; the calculation keeps full precision (15 significant digits).

Frequently asked questions

How many milliamps are in an amp?

1,000 mA.

How do I estimate battery life from mA?

Divide capacity in mAh by current in mA: a 2,000 mAh battery at 100 mA lasts about 20 hours (in practice less).

Is amp the same as ampere?

Yes, “amp” is the everyday short form.

Are these electric current conversions exact?

Each unit is defined from its official definition (for example 1 inch = 2.54 cm exactly). Results are calculated in double precision and only rounded to the decimal places you choose when shown.